Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Dunn, NC

Haas Door Extension Spring Replacement in Dunn, NC

Side-mounted extension springs replaced in matched pairs, with safety cables installed. Typical cost $150-$350.

From the first phone call to the final safety test, Haas Door extension spring replacement in Dunn, NC follows a simple process: diagnose, quote, repair, test. Side-mounted extension springs replaced in matched pairs, with safety cables installed. We work on Haas Door garage doors of every age, from older models to current lines, and carry or can source compatible parts. Haas Door, based in Wauseon, Ohio, makes residential and commercial sectional and rolling doors.

Safety first: springs and cables hold hundreds of pounds of tension. Don't try to adjust or remove them yourself, and don't run the opener on a door that's crooked or has a broken spring.

Signs you need Haas Door extension spring replacement

  • A stretched, sagging or snapped spring along one of the horizontal tracks
  • The door lifts unevenly or sits crooked
  • A missing or broken safety cable through the spring
  • Pulleys squealing or wobbling

Why this happens

  • Metal fatigue from years of stretching
  • Rust and worn pulleys
  • Mismatched springs from an earlier repair

What you can check yourself

  • Make sure each extension spring has a safety cable running through it. That cable keeps a snapped spring from flying across the garage.
  • Look at the pulleys and cables for fraying.
  • Don't try to stretch or re-hook an extension spring under tension.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Open the door fully and secure it so spring tension is released
  2. Replace both springs as a matched pair, color-coded for door weight
  3. Replace worn pulleys and lift cables if needed
  4. Install or replace the safety containment cables
  5. Balance the door and test it through several cycles

How much does Haas Door extension spring replacement cost?

$150-$350Typical range, parts & labor
1-1.5 hoursTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Haas Door services

Local Haas Door extension spring replacement for Dunn, NC

Humidity in North Carolina puts a thin layer of rust on spring coils, and that friction wears springs out early. Coated or galvanized springs last noticeably longer here.

Close to the coast, salt air speeds up corrosion. Galvanized or coated springs, nylon rollers and stainless hardware hold up better than bare steel.

Our Haas Door extension spring replacement service covers Dunn (ZIP codes 28334 and 28335) and nearby towns including Erwin (4 mi), Benson (6.2 mi), Coats (7.9 mi) and Buies Creek (10.3 mi). Call (833) 435-8883 to book a visit in Dunn.

Haas Door Extension Spring Replacement: frequently asked questions

How much does Haas Door extension spring replacement cost in Dunn, NC?

Haas Door Extension Spring Replacement typically costs $150-$350 including parts and labor, and usually takes 1-1.5 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Haas Door extension spring replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Haas Door extension spring replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Haas Door warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where North Carolina or Dunn requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Dunn, NC

Midland Garage Door Off-Track Garage Door Repair

Doors that have come off their tracks secured, re-hung and realigned.

Typical $175-$450

Hörmann Garage Door Roller Replacement

Hörmann is a German manufacturer of residential and commercial doors and openers with North American operations.

Typical $150-$350

Marantec Garage Door Opener Installation

Marantec is a German manufacturer of residential and commercial door openers.

Typical $350-$800

Amarr Garage Door Panel Replacement

Amarr, an ASSA ABLOY Group brand, makes residential lines such as Classica, Heritage, Lucern and Oak Summit, as well as commercial doors.

Typical $300-$900

Genie Remote & Keypad Programming

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $50-$150

CHI Overhead Doors Garage Door Installation

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $1,200-$4,500

Garage Door Installation

New steel, insulated, wood-look and carriage-style doors, measured and professionally installed.

Typical $1,200-$4,500

Cornell Cookson Commercial Garage Door Repair

Cornell Cookson makes rolling steel service doors, security grilles and rolling fire doors.

Typical $250-$1,000

Holmes Garage Door Garage Door Track Repair

Bent, loose or misaligned tracks straightened, realigned or replaced.

Typical $150-$400

Garaga Off-Track Garage Door Repair

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $175-$450

Rolling Steel Door Repair

Rolling steel service doors, curtains, guides and springs repaired.

Typical $300-$1,500

Windsor Door Torsion Spring Replacement

Torsion springs replaced and wound correctly, with high-cycle upgrades available.

Typical $200-$450

Garage door stuck, noisy or broken?

Talk to a garage door technician in Dunn, NC now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote